Job: Bird Spike Installation

Install bird spikes on designated ledges, roofs, or other surfaces to deter birds from landing. The work shall include the following:

• Preparation: Clean and dry the surface where the bird spikes will be installed.
• Spike Installation: Apply a suitable adhesive (silicone or mechanical fasteners) to the base of the bird spike strips.
• Placement: Securely position the bird spike strips along the designated area, ensuring proper coverage and overhang.
• Completion: Press the bird spikes firmly into place and allow the adhesive to cure completely (if applicable).

• Bird spikes (appropriate size and material for the application)
• Adhesive (silicone sealant or mechanical fasteners, depending on the chosen method)
• Cleaning materials (rags, scraper, etc.)

• Wear appropriate personal protective equipment (PPE) such as gloves and safety glasses when handling bird spikes and adhesives.
• Be cautious of heights if installing on roofs or ledges.
• Use a sturdy ladder and ensure proper footing when working at elevated positions.

• The specific scope of work and materials required may vary depending on the type of surface, bird species you want to deter, and the desired level of coverage.
• Consider the aesthetics of the area when choosing bird spike material and placement.
• Ensure the chosen adhesive is compatible with the surface material and weather conditions.
• It is recommended to consult a professional for complex installations or if unsure about the appropriate bird spike type or application method.